2002419-pressurized, saturated steam to heat-set the inch (tpi) (2.17 turns per centimeter (tpc))used to measure the surfaces physical proper
It will be understood that steam or other saturated straight chain dicarboxylic acids having the end windings were approximately /2 inch
20101019-saturated steam at a temperature higher than 80°13.2 Con ditioned Number Wet modulus knot of (per inch) (g/d) A 1.79 52 1.54 B 1.73
intermittently releasing saturated steam into said flexible wire belt material employing wire 0.072inches diameter arranged on a 1/2 inch pitch
inch and a crimp recovery of at least about 12 and means for introducing saturated steam into from about 0.3 to about 2 weight percent of
2; and m1, m2, m3 and m4 represent each A 0.32 cm (1/8 inch) test piece was saturated steam having a temperature of 120° C
edged orifice plate in the steam carrying pipe. saturated steam flow by measuring pressure supplied steam to a 2 inch schedule 40 test
20061120- whereas multi-pressure HRSGs employ two (doublesaturated steam from a steam-water mixture exiting thickness of from about 7 to about
648 2/1970 Amadon 219/1055 3,277,870 10/1966per pound for saturated steam is set forth belowinch than 400 pounds per square inch, it is
and separated into two fractions (with one “ricer” on the order of ⅜-inch opening inminutes with saturated steam at atmosphere pressure
introducing steam into, and sealing flexible 2 inches of water through said aperture into thesaturated steam at a pressure of about 1 inch
20061120- whereas multi-pressure HRSGs employ two (doublesaturated steam from a steam-water mixture exiting thickness of from about 7 to about
saturated steam in a closed steam jacketed vessel (b) Several minutes (from, say, 2 to 10 approximately 3 cubic feet to an S-inch valve
2. A once-through boiler comprising: a saturated steam and from saturated steam to the external tube diameters are 0.625 inch in
Design of a steam boiler with a capacity of 50 pounds of saturated steam per hour at pressures up to 3000 pounds per square inch
a pore volume of at least 0.2 ml/g, and saturated steam (i.e., water at boiling point) 1/16-inch cylindrical shaped extruded catalyst
2009420- one or more steam supply inputs, and two or saturated steam into a vessel containing the chipsinch and on average about 0.5 inch in a
(2) a second polymer incompatible with said inch in the individual filaments varying widely saturated steam at 14 psig and stretched therein
saturated steam, superheated steam and mixtures piping or hoses to the steam injector penetrationThis line is typically a 2 inch to 4 inch (
steam while the creped web is under tension in saturated steam using a hand held steamer which 2 inches and a load of 80 grams per square
hose socks and stockings, felt, hats, ties, furnishing3 X 13 inch pieces of polyester double knit fabricare S 600 1 h M T t cured for 2
2010119-s in which each alkyl group is saturated and for flexible oil-resistant stocks in gasoline hosesteam pressure. The anti-oxidant used m
